Foxy Designz
Sunday, December 5, 2010
Vindictive
Click Image for Full Size
©Anna Marine
Any similarities to another tutorial is purely coincidental.
©Anna Marine
Any similarities to another tutorial is purely coincidental.
Kit of Choice As I am Using a Kit
By Gothic Inspirations "Vindictive Pleasures"
You can purchase this kit at Stargazer Scrap Shop
Tubes of Choice
Im Using the Artwork of ©Anna Marine
You Can purchase his work at CILM
You need a license to use his art work.
No Outside Filters Needed
Font of Choice
By Gothic Inspirations "Vindictive Pleasures"
You can purchase this kit at Stargazer Scrap Shop
Tubes of Choice
Im Using the Artwork of ©Anna Marine
You Can purchase his work at CILM
You need a license to use his art work.
No Outside Filters Needed
Font of Choice
Lets Begin
File new 700x700
Grab your flood fill tool and fill
your background with white
Open Tag 2 in the Kit
Copy and paste it as a new layer
Resize it by 80%
Place the tag in center of your canvas
Open your Mesh and paste it as a new layer
Resize the mesh by 85%
Place the mesh behind the tag 2
Give it a small drop shadow
Open the Netting and paste it on to your canvas
Reisze it by 60%
Go to image Free Rotate Left by 90
Move the netting to the left side edge
So it looks like its sticking out from behind the tag.
Duplicate the netting go to image / Mirror
Now it should be on the right side behind the Tag
Merge down the 2 nettings and give them both a drop shadow
Grab your flood fill tool and fill
your background with white
Open Tag 2 in the Kit
Copy and paste it as a new layer
Resize it by 80%
Place the tag in center of your canvas
Open your Mesh and paste it as a new layer
Resize the mesh by 85%
Place the mesh behind the tag 2
Give it a small drop shadow
Open the Netting and paste it on to your canvas
Reisze it by 60%
Go to image Free Rotate Left by 90
Move the netting to the left side edge
So it looks like its sticking out from behind the tag.
Duplicate the netting go to image / Mirror
Now it should be on the right side behind the Tag
Merge down the 2 nettings and give them both a drop shadow
Open the Flower Clip
Paste it on to your canvas
Reisize it by 60%
Place it in center / behind the Front tag
So only a little it sticking out
Dupilcate it and go to image / flip
Merge down the two clips and give
them a drop shadow,
Open the Plants
Paste them on to your canvas
Resize the plant by 70%
Place the plant to the right
Duplicate / Image / Morror
Once again merge them togethor
Now activate your top layer
Now open your rose and paste it on to your canvas
Go to image /free rotate right by 90
Go to image / Resize by 75%
Place it to the right front bottom edge of the tag 2
Duplicat the Rose and go to image / Mirror
Give your roses a simple drop shadow
Now open the Purple Flowers
Paste them on to your canvas
Resize the flowers by 70%
Place them in center of the 2 Purple Roses
Now open your Tube
Copy and paste your tube and place
It in the center of the tag
Drag your tube down Below the 2 roses.
Open the Metal Flower 2
Copy and paste it as a new layer
Resize it by 60% and place it behind your tube
Open the Potion and place it on top the Roses
Resize the potion by 50%
Go to image / Adjust / Sharpen
And your Copyright Information and Name
And your Done !
Paste it on to your canvas
Reisize it by 60%
Place it in center / behind the Front tag
So only a little it sticking out
Dupilcate it and go to image / flip
Merge down the two clips and give
them a drop shadow,
Open the Plants
Paste them on to your canvas
Resize the plant by 70%
Place the plant to the right
Duplicate / Image / Morror
Once again merge them togethor
Now activate your top layer
Now open your rose and paste it on to your canvas
Go to image /free rotate right by 90
Go to image / Resize by 75%
Place it to the right front bottom edge of the tag 2
Duplicat the Rose and go to image / Mirror
Give your roses a simple drop shadow
Now open the Purple Flowers
Paste them on to your canvas
Resize the flowers by 70%
Place them in center of the 2 Purple Roses
Now open your Tube
Copy and paste your tube and place
It in the center of the tag
Drag your tube down Below the 2 roses.
Open the Metal Flower 2
Copy and paste it as a new layer
Resize it by 60% and place it behind your tube
Open the Potion and place it on top the Roses
Resize the potion by 50%
Go to image / Adjust / Sharpen
And your Copyright Information and Name
And your Done !
Thanks for Trying my Tutorial
I Would love to see any Results
I Would love to see any Results
Friday, December 3, 2010
Bah HumBug !
Supplies Needed:
Kit of Choice As I am Using a Kit
By Candy's Treats "Bah HumBug"
You can purchase this kit at Stargazer Scrap Shop
Tubes of Choice
Im Using the Artwork of ©Keith Garvey
You Can purchase his work at MPT
You need a license to use his art work.
Plug ins - Xereo - Soft Mood
Mura Meister - Copies
Font of Choice
Any similarities to another tutorial is purely coincidental.
Lets Begin
File new 700x700
Grab your flood fill tool and flood fill the background White.
Open Frame 2,3 and 4
Copy and paste Frame 2 as a new layer
Go to image Resize by 85%
Make sure all layers is unchecked
After Resizing your frame Go to Image/Free Rotate/Right by 20
Go to Image / Adjust / Sharpen
Copy and paste Frame 3 as a new layer
Go to image Resize by 85%
Make sure all layers is unchecked
After Resizing your frame Go to Image/Free Rotate/left by 20
Go to Image / Adjust / Sharpen
Copy and paste Frame 4 as a new layer
Go to image Resize by 85%
Make sure all layers is unchecked
After Resizing your frame Go to Image/Free Rotate/Right by 20
Go to Image / Adjust / Sharpen
Activate your bottom frame
Grab your magic wand and click in the center of the frame
Make sure your feather / Tolerance is set at 0
Go to selections/ Modify / Expand by 5
Activate your background layer
Open Paper 6 and copy and paste it as a new Layer
Resize the paper by 85%
Go to selections / Invert / Hit your delete button once
Select None - Go to image/ Adjust / Sharpen
Now we are going to activate the top Layer once again
Open 3 Flowers and arrange them in any order as long as they are centered
Merge the 3 flowers together/merge down all 3 flowers
Go to effects/plugins/muras/copies and choose encircle
Change the Number to 8 and click ok
Now drag the ring of flowers to below your bottom frame
Give the ring of flowers a simple drop shadow I used
V&H 2 / Op 50 / Blur 5
Now Open the Mesh
Copy and past the mesh as a new layer
Resize your mesh by 85%
Move the mesh above your background layer
Go to image Free Rotate right by 20
Duplicate the mesh and go to image / mirror
Merge togther the ttwo mesh layers
Open Cluster 3 and paste it as a new layer
Bring it to above the top frame
Image / Resize / 85%
Go to Image / Free Rotate left by 20
Place it near the bottom edge of your frame
Open your Close up of Choice
Then Paste your close up as a new layer
Bring your close up on top your first frame
Place it to the left side
Lower the opacity of your close up to 33
Open your main Tube and paste it as a new layer
Go image / Mirror
Resize your tube if you need to as i did mine by 85%
Move your tube to the right side
Go to effects / Xero/ Soft Mood / Default settings ok
Duplicate your main tube
Drag your main tube under your bottom frame layer
Grab your eraser tool and erase any part that stick out
Repeat the eraser to your top top tube as well.
Open the HumBug Charms
Paste it as a new layer and make sure your arrange it to the top
resize the Charms by 85%
Go to image / Free rotate left by 20
Open one of the stockings
Resize your stocking by 60%
Move it to the far left of your HumBug Charms
And place it on the corner of the B on Bah
(see my image for preference)
Open your tag
Resize your tag by 60%
Free rotate your tag right by 25
Place it at the bottom left of your image(tag)
Add Your Name and Proper Copyright Information
Walah Your Done !!
Thanks for Trying my Tutorial
I Would love to see any Results
Grab your flood fill tool and flood fill the background White.
Open Frame 2,3 and 4
Copy and paste Frame 2 as a new layer
Go to image Resize by 85%
Make sure all layers is unchecked
After Resizing your frame Go to Image/Free Rotate/Right by 20
Go to Image / Adjust / Sharpen
Copy and paste Frame 3 as a new layer
Go to image Resize by 85%
Make sure all layers is unchecked
After Resizing your frame Go to Image/Free Rotate/left by 20
Go to Image / Adjust / Sharpen
Copy and paste Frame 4 as a new layer
Go to image Resize by 85%
Make sure all layers is unchecked
After Resizing your frame Go to Image/Free Rotate/Right by 20
Go to Image / Adjust / Sharpen
Activate your bottom frame
Grab your magic wand and click in the center of the frame
Make sure your feather / Tolerance is set at 0
Go to selections/ Modify / Expand by 5
Activate your background layer
Open Paper 6 and copy and paste it as a new Layer
Resize the paper by 85%
Go to selections / Invert / Hit your delete button once
Select None - Go to image/ Adjust / Sharpen
Now we are going to activate the top Layer once again
Open 3 Flowers and arrange them in any order as long as they are centered
Merge the 3 flowers together/merge down all 3 flowers
Go to effects/plugins/muras/copies and choose encircle
Change the Number to 8 and click ok
Now drag the ring of flowers to below your bottom frame
Give the ring of flowers a simple drop shadow I used
V&H 2 / Op 50 / Blur 5
Now Open the Mesh
Copy and past the mesh as a new layer
Resize your mesh by 85%
Move the mesh above your background layer
Go to image Free Rotate right by 20
Duplicate the mesh and go to image / mirror
Merge togther the ttwo mesh layers
Open Cluster 3 and paste it as a new layer
Bring it to above the top frame
Image / Resize / 85%
Go to Image / Free Rotate left by 20
Place it near the bottom edge of your frame
Open your Close up of Choice
Then Paste your close up as a new layer
Bring your close up on top your first frame
Place it to the left side
Lower the opacity of your close up to 33
Open your main Tube and paste it as a new layer
Go image / Mirror
Resize your tube if you need to as i did mine by 85%
Move your tube to the right side
Go to effects / Xero/ Soft Mood / Default settings ok
Duplicate your main tube
Drag your main tube under your bottom frame layer
Grab your eraser tool and erase any part that stick out
Repeat the eraser to your top top tube as well.
Open the HumBug Charms
Paste it as a new layer and make sure your arrange it to the top
resize the Charms by 85%
Go to image / Free rotate left by 20
Open one of the stockings
Resize your stocking by 60%
Move it to the far left of your HumBug Charms
And place it on the corner of the B on Bah
(see my image for preference)
Open your tag
Resize your tag by 60%
Free rotate your tag right by 25
Place it at the bottom left of your image(tag)
Add Your Name and Proper Copyright Information
Walah Your Done !!
Thanks for Trying my Tutorial
I Would love to see any Results
Tuesday, November 16, 2010
Spring Garden
Spring Garden
Any similarities to another tutorial is purely coincidental
This Tutorial Has Been Written and Created By Foxys Designz
In this Tutorial You will need the Following with
Experience of Paint Shop Pro
4 Tube of Choice as I Use Artist © Jennifer Janesko From CILM
PTU Kit From Gothic Inspirations A Spring Garden you can Purchase Here
OutSide PlugIns Xero - Softmood
Ok Now it's time to get started
Open up a new 800x800
(Don't worry we can resize later)
Flood fill this background with white
Open the Mesh and Copy and paste it as a new layer
Resize it by 50% and place it in the center of your canvas.
Give your Mesh a slight Drop shadow of choice.
Open the Parchment2 of the kit
Copy and paste it as a new layer on your canvas
Go to image and resize it by 50%
Place it almost to the center of the mesh torwards the bottom
Give it a small Drop shadow of choice.
Duplicate Parchment2
Go to Image / Free Rotate / Rotate Left by 25
Drag this Below the Original one and move it slightly left.
(Use my image for Preference)
Open one of the Staples
Copy and paste your staple as a new layer
Go to image and resize it by 50%
Image / Rotate left by 90
Place the staple to the far right of the top parchment2
Open up the Frames
Copy and paste the Frames as a new layer onto your canvas
Resize the frames by 70%
Place the Frames over to the Left side near the staple.
Take your magic wand set the tolerence and Feather to 0
Click in the middle the Frame starting at the top
Go to Selections / Modify / Expand by 4
Open one of your close ups and resize it by 40%
Drag it under your frames
Go to Selections / invert and hit delete on your keyboard
Selections / Select None
Staying on your Close up Layer
Go Effects / Photo Effects / Sepia Toning
Set the Amount to Aging to 50 click ok
Go to effects again
Xero / Soft Mood and use the Default settings
Then Click OK.
You will do the same thing for your next 3 closeups.
Now Give your Frames a Slight Drop Shadow.
Open the Flower
Copy and paste it as a new layer on to your canvas
Resize it by 50%
I Used My Pick Tool to Turn It around so it sits on the Corner Edge
(Use my Image for Preference)
Give your Flower a slight Drop Shadow
Open up the Leaves
Copy and paste the Leaves as a new layer onto your canvas
Resize the leaves by 65%
Place the leaves to the lower edge of the top Parchment 2
Duplicate your Leaves and go to Image / Flip
Place it torwards the lower edge as well.
Merge down the leaves together
Drag the leaves under your flower layer.
Now Open Your Main Tube
Copy and paste your tube as a new layer onto your canvas
Resize your tube by 80% Or what your Prefer
Drag your tube down Below the Frames Layer
(Use your eraser to erase any extra hanging out the the left)
Now your Tube Should look Like mine
Go to plugins / Xero and use default settings
Open your wings and paste them as a new layer onto your canvas
Resize your Wings by 80%
Go to image Free Rotate right by 30%
Drag your wings under your bottom parchement
Place the wings to the left so they look like there sticking out
Go to Adjust and Sharpen
Effects . and give it a small drop shadow.
Add any Extra elements and place them how you like.
Be sure to add your right CopyRight Info
Thanks for Trying my Tutorial
I Would love to see any Results
♒☠ Foxys Designz ☠♒
In this Tutorial You will need the Following with
Experience of Paint Shop Pro
4 Tube of Choice as I Use Artist © Jennifer Janesko From CILM
PTU Kit From Gothic Inspirations A Spring Garden you can Purchase Here
OutSide PlugIns Xero - Softmood
Ok Now it's time to get started
Open up a new 800x800
(Don't worry we can resize later)
Flood fill this background with white
Open the Mesh and Copy and paste it as a new layer
Resize it by 50% and place it in the center of your canvas.
Give your Mesh a slight Drop shadow of choice.
Open the Parchment2 of the kit
Copy and paste it as a new layer on your canvas
Go to image and resize it by 50%
Place it almost to the center of the mesh torwards the bottom
Give it a small Drop shadow of choice.
Duplicate Parchment2
Go to Image / Free Rotate / Rotate Left by 25
Drag this Below the Original one and move it slightly left.
(Use my image for Preference)
Open one of the Staples
Copy and paste your staple as a new layer
Go to image and resize it by 50%
Image / Rotate left by 90
Place the staple to the far right of the top parchment2
Open up the Frames
Copy and paste the Frames as a new layer onto your canvas
Resize the frames by 70%
Place the Frames over to the Left side near the staple.
Take your magic wand set the tolerence and Feather to 0
Click in the middle the Frame starting at the top
Go to Selections / Modify / Expand by 4
Open one of your close ups and resize it by 40%
Drag it under your frames
Go to Selections / invert and hit delete on your keyboard
Selections / Select None
Staying on your Close up Layer
Go Effects / Photo Effects / Sepia Toning
Set the Amount to Aging to 50 click ok
Go to effects again
Xero / Soft Mood and use the Default settings
Then Click OK.
You will do the same thing for your next 3 closeups.
Now Give your Frames a Slight Drop Shadow.
Open the Flower
Copy and paste it as a new layer on to your canvas
Resize it by 50%
I Used My Pick Tool to Turn It around so it sits on the Corner Edge
(Use my Image for Preference)
Give your Flower a slight Drop Shadow
Open up the Leaves
Copy and paste the Leaves as a new layer onto your canvas
Resize the leaves by 65%
Place the leaves to the lower edge of the top Parchment 2
Duplicate your Leaves and go to Image / Flip
Place it torwards the lower edge as well.
Merge down the leaves together
Drag the leaves under your flower layer.
Now Open Your Main Tube
Copy and paste your tube as a new layer onto your canvas
Resize your tube by 80% Or what your Prefer
Drag your tube down Below the Frames Layer
(Use your eraser to erase any extra hanging out the the left)
Now your Tube Should look Like mine
Go to plugins / Xero and use default settings
Open your wings and paste them as a new layer onto your canvas
Resize your Wings by 80%
Go to image Free Rotate right by 30%
Drag your wings under your bottom parchement
Place the wings to the left so they look like there sticking out
Go to Adjust and Sharpen
Effects . and give it a small drop shadow.
Add any Extra elements and place them how you like.
Be sure to add your right CopyRight Info
Thanks for Trying my Tutorial
I Would love to see any Results
♒☠ Foxys Designz ☠♒
Wednesday, September 15, 2010
Paris Beauties
Paris Beauties
Supplies Needed:
Kit of Choice As I am Using a Kit
Created by Jill called "CestLaVie"
You can purchase this kit at her Store HERE
4 Tubes of Choice or 4 Close ups
Im Using the Artwork of Jennifer Janesko
You Can purchase her work at CILM
You need a license to use her art work.
Vix Mask 414 Which you can get from her site HERE
Font of ChoiceAny similarities to another tutorial is purely coincidental.
Let's Begin :)
Kit of Choice As I am Using a Kit
Created by Jill called "CestLaVie"
You can purchase this kit at her Store HERE
4 Tubes of Choice or 4 Close ups
Im Using the Artwork of Jennifer Janesko
You Can purchase her work at CILM
You need a license to use her art work.
Vix Mask 414 Which you can get from her site HERE
Font of ChoiceAny similarities to another tutorial is purely coincidental.
Let's Begin :)
Open a New 700x700
(Dont worry bout the size we will resize later)
Open your mask and a paper of choice
Minimize your mask
Copy and paste your paper as a new layer
Go to layers / New Mask Layer/ From Image
Find Vix_Mask414 / Source Luminance/ Invert mask unchecked
(Dont worry bout the size we will resize later)
Open your mask and a paper of choice
Minimize your mask
Copy and paste your paper as a new layer
Go to layers / New Mask Layer/ From Image
Find Vix_Mask414 / Source Luminance/ Invert mask unchecked
On your mask layer Merge group
Resize your mask by 85%
Now Go to Image/ Free Rotate by 45% left
Open your Frame and Paste it as a new layer
Resize it By 85%
Free rotate your frame by 20% to left
Open your ribbon and paste it as a new layer
Resize your ribbon to 50%
Go to Free Rotate by 20% to the right
Place the ribbon at top Middle of your Frame.
Resize your mask by 85%
Now Go to Image/ Free Rotate by 45% left
Open your Frame and Paste it as a new layer
Resize it By 85%
Free rotate your frame by 20% to left
Open your ribbon and paste it as a new layer
Resize your ribbon to 50%
Go to Free Rotate by 20% to the right
Place the ribbon at top Middle of your Frame.
Add a Simple small drop shadow to your frame.
Open Flowers and paste them as a new layer
Reisize your flowers down by 60%
Free rotate your flower right by 20%
Postion it at the top middle of the frame
Now Duplicate your flower
Go to Image/Mirror
Then Image / Flip and place it to the right.
Open the medal doodle
Copy and paste the doodle behind both flower layers
Leave this one as it but if you need to resize it(85%)
Duplicate your medal doodle
Duplicate it and go to Image/ Mirror/Flip
No Free Rotate your doodle 45 Right
Resize your doodle by 60%
Place it to the left lower side under the frame
Open Flowers and paste them as a new layer
Reisize your flowers down by 60%
Free rotate your flower right by 20%
Postion it at the top middle of the frame
Now Duplicate your flower
Go to Image/Mirror
Then Image / Flip and place it to the right.
Open the medal doodle
Copy and paste the doodle behind both flower layers
Leave this one as it but if you need to resize it(85%)
Duplicate your medal doodle
Duplicate it and go to Image/ Mirror/Flip
No Free Rotate your doodle 45 Right
Resize your doodle by 60%
Place it to the left lower side under the frame
(See my results for help)
Open your Sequins
Paste your Sequins as a new layer
Then Reszie them by 80%
Postion one at the top. on top the Mask layer
Go to image/ mirror and place it to your liking or like mine
Give the sequins a simple drop shadow
Open the heart clock
Copy and paste it as a new layer
Then Resize it by 70%
Place it behind your sequins.
Give your clock a simple drop shadow.
Open your Sequins
Paste your Sequins as a new layer
Then Reszie them by 80%
Postion one at the top. on top the Mask layer
Go to image/ mirror and place it to your liking or like mine
Give the sequins a simple drop shadow
Open the heart clock
Copy and paste it as a new layer
Then Resize it by 70%
Place it behind your sequins.
Give your clock a simple drop shadow.
open the black flower
Copy and paste it as a new layer
Resize the flower by 50%
Place your flower on top your lower frame
Duplicate it and resize the duplicate by 85%
Place it to the right side top of the frame
Now Click and activate your frame layer
Click your magic wand
Tolerance and Feather to o
Hold shift button and select inside all the open areas in your frame
Go to selections / Modify/Expand by 4
Now open your 4 tubes or close ups
Paste them as a new layer
Postion and resize them to your liking
Once you have them in place
Copy and paste it as a new layer
Resize the flower by 50%
Place your flower on top your lower frame
Duplicate it and resize the duplicate by 85%
Place it to the right side top of the frame
Now Click and activate your frame layer
Click your magic wand
Tolerance and Feather to o
Hold shift button and select inside all the open areas in your frame
Go to selections / Modify/Expand by 4
Now open your 4 tubes or close ups
Paste them as a new layer
Postion and resize them to your liking
Once you have them in place
Go to Selections/ Invert
on each tube layer click the delete button once
Do Not select none yet
Open your paper of choice im Using a black one
Hit the delete button Select none.
Add Your name with Font of shoice as Im Using JackieO ROB Font
Add Your Proper CopyRight Info on your tag
And You Are Done!
Thank you For Stopping By and Trying My Tutorial.
on each tube layer click the delete button once
Do Not select none yet
Open your paper of choice im Using a black one
Hit the delete button Select none.
Add Your name with Font of shoice as Im Using JackieO ROB Font
Add Your Proper CopyRight Info on your tag
And You Are Done!
Thank you For Stopping By and Trying My Tutorial.
♒☠ Foxys Designz ☠♒
Friday, September 10, 2010
Touched
Touched
Scrapkit By Created by Jill
A Touch of Color
PTU You can Purchase it Here
Tube of Choice as Im using
Dark Yarrow from Dreamscape Imaging
You must have a license to use her art
Font of Choice
I Used Jelyka
Plugins
I Used Jelyka
Plugins
EyeCandy 4 - Smoke
Xero - Porcilain
Animation Shop
I Assume you already have knowledge of PSP
Xero - Porcilain
Animation Shop
I Assume you already have knowledge of PSP
So Lets Begin!
Any similarities to another tutorial is purely coincidental.
Open a New 600x250
Open a paper of your choice
go to selection/select all and paste into selection
go to selections / modify / contract by 4
paste paper as new layer and hit the delete button once
select none
Grab your Square Rectangle Shape
Width 8 and choose a color matching your tube or kit
And put it in the foreground/ background Null
Convert it to raster and use a small inner Bevel On it.
Open a paper of your choice
go to selection/select all and paste into selection
go to selections / modify / contract by 4
paste paper as new layer and hit the delete button once
select none
Grab your Square Rectangle Shape
Width 8 and choose a color matching your tube or kit
And put it in the foreground/ background Null
Convert it to raster and use a small inner Bevel On it.
Use a image of choice
As i used the one From Dark Yarrows Tube
Grab your magic wand and select the center of your Square.
Go to selections/ modify/ expand by 4
Go to selections/invert
Select your image layer and hit the delete button once
Make sure your image is under the Sqaure
Go to effects/ porcilain/ default settings
set the image to Luminace(L)
As i used the one From Dark Yarrows Tube
Grab your magic wand and select the center of your Square.
Go to selections/ modify/ expand by 4
Go to selections/invert
Select your image layer and hit the delete button once
Make sure your image is under the Sqaure
Go to effects/ porcilain/ default settings
set the image to Luminace(L)
Open the string Mesh
Copy and past it as a new layer
Resize your mesh if you need to as
i did by 50%
Give the mesh a drop shadow
Open the window Panel
Copy and paste it as a new layer
Resize the panel by 50%
Grab your magic wand and select the middle window
Go to selections/ modify/ expand by 3
Open another paper of your choice
Paste it as a new layer
Resize your paper by 50%
Go to image/ Adjust and Sharpen it
Copy and past it as a new layer
Resize your mesh if you need to as
i did by 50%
Give the mesh a drop shadow
Open the window Panel
Copy and paste it as a new layer
Resize the panel by 50%
Grab your magic wand and select the middle window
Go to selections/ modify/ expand by 3
Open another paper of your choice
Paste it as a new layer
Resize your paper by 50%
Go to image/ Adjust and Sharpen it
Go to Selections/ Invert and hit delete once
then Select none.
open some leaves of your choice
I Choose the red ones from Jills Kit
Copy and past them as a new layer
I Didnt resize mine
(see my image for Results)
Go to effects / Xereo/ Porcelin
Use the Default settings 2 times
to give it the faded look
Make sure your leafs are under the window panel
then Select none.
open some leaves of your choice
I Choose the red ones from Jills Kit
Copy and past them as a new layer
I Didnt resize mine
(see my image for Results)
Go to effects / Xereo/ Porcelin
Use the Default settings 2 times
to give it the faded look
Make sure your leafs are under the window panel
Open the Gears and paste them as a nwe layer
Resize the Gears by 50%
Place the gears to the left side
Go to Image / Adjust / Sharpen your gears
Give the gears a drop shadow
Open a different Leaf
Copy and past the leaf as a new layer and place
it behind your image layer
Go to effects and use the same Porcilain settings as before
Give the leafs a drop shadow.
Place the leaf so it looks like its hanging out from the square.
Add the rest of your elements of choice now
And Your tube of choice as we will get ready to
Animate the Smoke.
Dont forget to add your right copyright info
Resize the Gears by 50%
Place the gears to the left side
Go to Image / Adjust / Sharpen your gears
Give the gears a drop shadow
Open a different Leaf
Copy and past the leaf as a new layer and place
it behind your image layer
Go to effects and use the same Porcilain settings as before
Give the leafs a drop shadow.
Place the leaf so it looks like its hanging out from the square.
Add the rest of your elements of choice now
And Your tube of choice as we will get ready to
Animate the Smoke.
Dont forget to add your right copyright info
STEP 1
Select your paper layer under the window panel
duplicate it 2 times for a total of 3 layers
x out the eye on the bottom 2
select the top layer
go to Eye Candy 4 / Smoke
Select your paper layer under the window panel
duplicate it 2 times for a total of 3 layers
x out the eye on the bottom 2
select the top layer
go to Eye Candy 4 / Smoke
Use the Settings Below
x out the top layer and open layer 2
STEP 2
Repeat step 1 but this time hit the random seed button once
x out the 2 layer and open layer 3
STEP 3
Repeat step 2 but this time hit the random seed button once
Now x out layer 3 and ope the first one
Now there may look like some smoke outside the panel but each
layer of smoke Grab your eraser tool for each one and
Erase if there is any hanging outside the Window Panel.
Repeat step 1 but this time hit the random seed button once
x out the 2 layer and open layer 3
STEP 3
Repeat step 2 but this time hit the random seed button once
Now x out layer 3 and ope the first one
Now there may look like some smoke outside the panel but each
layer of smoke Grab your eraser tool for each one and
Erase if there is any hanging outside the Window Panel.
TIME TO ANIMATE
With layer 1 of smoke open
Merge Visible / edit Copy
Go to Animation Shop
With layer 1 of smoke open
Merge Visible / edit Copy
Go to Animation Shop
Paste as a new animation
go back to Your PSP
Edit UnMerge
Close out the Top layer
Now open the eye one 2nd one
Merge Visible / edit Copy
Go to Animation Shop
Paste it after current frame.
Do the same things as Step 3 above
Now in animation shop
Go to Edit and Select All
Then go to Animation, Frame Properties and set it to 40
Play your animation and Your Done !
Thanks for Trying my Tutorial !
Foxy
go back to Your PSP
Edit UnMerge
Close out the Top layer
Now open the eye one 2nd one
Merge Visible / edit Copy
Go to Animation Shop
Paste it after current frame.
Do the same things as Step 3 above
Now in animation shop
Go to Edit and Select All
Then go to Animation, Frame Properties and set it to 40
Play your animation and Your Done !
Thanks for Trying my Tutorial !
Foxy
Thursday, September 2, 2010
Gothic Journey
I was Inspired by alot of people to start
Writing Tutorials again so we are going to give it a shot once again.
Gothic Journey
Scrapkit By Gothic Inspirations
A Gothic Journey
PTU You can Purchase it Here
Tube of Choice as Im using
Diana Martinez from MPT
You must have a license to use her art
Scrapkit By Gothic Inspirations
A Gothic Journey
PTU You can Purchase it Here
Tube of Choice as Im using
Diana Martinez from MPT
You must have a license to use her art
Font of Choice
Animation Shop
I Assume you already have knowledge of PSP
Animation Shop
I Assume you already have knowledge of PSP
So Lets Begin!
File / New / 800x800 and flood fill it with white
we can always Resize later on
Open Frame 1 copy and paste the frame as a new layer
Resize your frame by 40%
Now go to Image Adjust and Sharpen
Open the Smoke Element
Copy and paste the Smoke as a new layer
Drag the Smoke under your frame layer
Grab your eraser tool and earase and extra hanging outside the frame
Copy and paste your tube as a new layer
Duplicate your tube and drag the duplicate under the smoke
On your top tube grab the eraser and erase the extra hanging out below the frame
Active the bottom tube and add a small drop shadow
I Used H-V 1 Opacity 69 Blur 6 and reverse it and use -1 both settings again.
Now activate your top tube once more
Grab your eraser tool and erase parts of the tube so it looks like the smokes over her
we will animate the smoke later.
activate your frame layer
Grab your magic wand and click inside it setting tolerance 0
go to selections/Modify/expand by 4
Copy and paste your paper of choice as a new layer
Go to Selections/Invert/Delete/ Select None
Make sure your paper layer is under your botton tube layer
Open Up Tree Stump2 and copy and paste it as a new layer
Resize the tree stump by 40%
Place the tree to the left side on top the frame
Give your tree stump a slight drop shadow
Open the skulls and paste them as a new layer
Place the skulls on top the tree at the bottom
See my image for preferences
open the Skele-Hand and paste it as a new layer
Resize the hand by 30% place it to the right side the frame so
it looks like its hanging from the inside
go to image/adjust/ adjust image
grab the gothic journey book
copy and paste the book as a new layer
resize the book by 35%
Place the book under the hand so looks like its handling the book
Give your book a small drop shadow
go to image/adjust/ adjust image
Open up the spider and paste it as a new layer
Resize your spider and place it on top between the bok and skull pile
Open the gothic lights and paste it as a new layer
resize the light by 35% and place it to the top far right of the frame
use my image for preference
duplicate the lights and place the duplicate to the far left
go to image/adjust/ adjust image
Open the crow and paste it as a new layer
resize the crow by 30% and place it to the top left of the frame
so it looksl ike its sitting on the frame
Duplicate the crow and go to image/mirror
It should now be on the right side the frame
Adjust and move the crow slightly so it looks like its sitting on the light
Give your crows a drop shadow
Open the Sign1 and paste it as a new layer
Resize the sign by 50% or till it fits perfect above behind the tube layer
go to image and adjust
Copy and paste the smudge as a new layer
Resize the smudge by 35%
go to image/adjust/ adjust image
Move the smudges behind the frame and tube layer
and place it to the right
Duplicate the smudge and go to Image/Mirror
It should now be on the left side
Give the smudges a drop shadow
Add Your name and the Proper Copyright of your Tube Image
Your done and Now its Time to Animate
go to the smoke layer and duplicate it 2 times for a total of 3
Rename each layer 1,2, and 3
X out 2 and 3 and activate 1
Grab your mesh tool
Grab the center right knod and move it a tiny bit then do the same thing for the left one
convert it before going on to the next part
X out layer 1 and open #2
Do the same thing as above only with the mesh tool move them in oposite directions
(Sorta like a random Seed only doing it with mesh tool)
X out layer 2 and open #3
Do the same thing as above only with the mesh tool move them in oposite directions
one more time.
Now open your animation shop
We can always resize it in animation shop if you need to
x out 2 and 3 and open 1
x out your white background
Merge visible, go to edit copy
Go to animation shop and paste as a new animation
Do the same thing for the next 2 as well
after getting all 3 layers in animation shop
go to select all and go to frame properites and change it to 40
Play your animation and resize it your Done !!
we can always Resize later on
Open Frame 1 copy and paste the frame as a new layer
Resize your frame by 40%
Now go to Image Adjust and Sharpen
Open the Smoke Element
Copy and paste the Smoke as a new layer
Drag the Smoke under your frame layer
Grab your eraser tool and earase and extra hanging outside the frame
Copy and paste your tube as a new layer
Duplicate your tube and drag the duplicate under the smoke
On your top tube grab the eraser and erase the extra hanging out below the frame
Active the bottom tube and add a small drop shadow
I Used H-V 1 Opacity 69 Blur 6 and reverse it and use -1 both settings again.
Now activate your top tube once more
Grab your eraser tool and erase parts of the tube so it looks like the smokes over her
we will animate the smoke later.
activate your frame layer
Grab your magic wand and click inside it setting tolerance 0
go to selections/Modify/expand by 4
Copy and paste your paper of choice as a new layer
Go to Selections/Invert/Delete/ Select None
Make sure your paper layer is under your botton tube layer
Open Up Tree Stump2 and copy and paste it as a new layer
Resize the tree stump by 40%
Place the tree to the left side on top the frame
Give your tree stump a slight drop shadow
Open the skulls and paste them as a new layer
Place the skulls on top the tree at the bottom
See my image for preferences
open the Skele-Hand and paste it as a new layer
Resize the hand by 30% place it to the right side the frame so
it looks like its hanging from the inside
go to image/adjust/ adjust image
grab the gothic journey book
copy and paste the book as a new layer
resize the book by 35%
Place the book under the hand so looks like its handling the book
Give your book a small drop shadow
go to image/adjust/ adjust image
Open up the spider and paste it as a new layer
Resize your spider and place it on top between the bok and skull pile
Open the gothic lights and paste it as a new layer
resize the light by 35% and place it to the top far right of the frame
use my image for preference
duplicate the lights and place the duplicate to the far left
go to image/adjust/ adjust image
Open the crow and paste it as a new layer
resize the crow by 30% and place it to the top left of the frame
so it looksl ike its sitting on the frame
Duplicate the crow and go to image/mirror
It should now be on the right side the frame
Adjust and move the crow slightly so it looks like its sitting on the light
Give your crows a drop shadow
Open the Sign1 and paste it as a new layer
Resize the sign by 50% or till it fits perfect above behind the tube layer
go to image and adjust
Copy and paste the smudge as a new layer
Resize the smudge by 35%
go to image/adjust/ adjust image
Move the smudges behind the frame and tube layer
and place it to the right
Duplicate the smudge and go to Image/Mirror
It should now be on the left side
Give the smudges a drop shadow
Add Your name and the Proper Copyright of your Tube Image
Your done and Now its Time to Animate
go to the smoke layer and duplicate it 2 times for a total of 3
Rename each layer 1,2, and 3
X out 2 and 3 and activate 1
Grab your mesh tool
Grab the center right knod and move it a tiny bit then do the same thing for the left one
convert it before going on to the next part
X out layer 1 and open #2
Do the same thing as above only with the mesh tool move them in oposite directions
(Sorta like a random Seed only doing it with mesh tool)
X out layer 2 and open #3
Do the same thing as above only with the mesh tool move them in oposite directions
one more time.
Now open your animation shop
We can always resize it in animation shop if you need to
x out 2 and 3 and open 1
x out your white background
Merge visible, go to edit copy
Go to animation shop and paste as a new animation
Do the same thing for the next 2 as well
after getting all 3 layers in animation shop
go to select all and go to frame properites and change it to 40
Play your animation and resize it your Done !!
Subscribe to:
Posts
(Atom)
My Blinkie
