Foxy Designz
Sunday, December 5, 2010
Vindictive
Click Image for Full Size
©Anna Marine
Any similarities to another tutorial is purely coincidental.
©Anna Marine
Any similarities to another tutorial is purely coincidental.
Kit of Choice As I am Using a Kit
By Gothic Inspirations "Vindictive Pleasures"
You can purchase this kit at Stargazer Scrap Shop
Tubes of Choice
Im Using the Artwork of ©Anna Marine
You Can purchase his work at CILM
You need a license to use his art work.
No Outside Filters Needed
Font of Choice
By Gothic Inspirations "Vindictive Pleasures"
You can purchase this kit at Stargazer Scrap Shop
Tubes of Choice
Im Using the Artwork of ©Anna Marine
You Can purchase his work at CILM
You need a license to use his art work.
No Outside Filters Needed
Font of Choice
Lets Begin
File new 700x700
Grab your flood fill tool and fill
your background with white
Open Tag 2 in the Kit
Copy and paste it as a new layer
Resize it by 80%
Place the tag in center of your canvas
Open your Mesh and paste it as a new layer
Resize the mesh by 85%
Place the mesh behind the tag 2
Give it a small drop shadow
Open the Netting and paste it on to your canvas
Reisze it by 60%
Go to image Free Rotate Left by 90
Move the netting to the left side edge
So it looks like its sticking out from behind the tag.
Duplicate the netting go to image / Mirror
Now it should be on the right side behind the Tag
Merge down the 2 nettings and give them both a drop shadow
Grab your flood fill tool and fill
your background with white
Open Tag 2 in the Kit
Copy and paste it as a new layer
Resize it by 80%
Place the tag in center of your canvas
Open your Mesh and paste it as a new layer
Resize the mesh by 85%
Place the mesh behind the tag 2
Give it a small drop shadow
Open the Netting and paste it on to your canvas
Reisze it by 60%
Go to image Free Rotate Left by 90
Move the netting to the left side edge
So it looks like its sticking out from behind the tag.
Duplicate the netting go to image / Mirror
Now it should be on the right side behind the Tag
Merge down the 2 nettings and give them both a drop shadow
Open the Flower Clip
Paste it on to your canvas
Reisize it by 60%
Place it in center / behind the Front tag
So only a little it sticking out
Dupilcate it and go to image / flip
Merge down the two clips and give
them a drop shadow,
Open the Plants
Paste them on to your canvas
Resize the plant by 70%
Place the plant to the right
Duplicate / Image / Morror
Once again merge them togethor
Now activate your top layer
Now open your rose and paste it on to your canvas
Go to image /free rotate right by 90
Go to image / Resize by 75%
Place it to the right front bottom edge of the tag 2
Duplicat the Rose and go to image / Mirror
Give your roses a simple drop shadow
Now open the Purple Flowers
Paste them on to your canvas
Resize the flowers by 70%
Place them in center of the 2 Purple Roses
Now open your Tube
Copy and paste your tube and place
It in the center of the tag
Drag your tube down Below the 2 roses.
Open the Metal Flower 2
Copy and paste it as a new layer
Resize it by 60% and place it behind your tube
Open the Potion and place it on top the Roses
Resize the potion by 50%
Go to image / Adjust / Sharpen
And your Copyright Information and Name
And your Done !
Paste it on to your canvas
Reisize it by 60%
Place it in center / behind the Front tag
So only a little it sticking out
Dupilcate it and go to image / flip
Merge down the two clips and give
them a drop shadow,
Open the Plants
Paste them on to your canvas
Resize the plant by 70%
Place the plant to the right
Duplicate / Image / Morror
Once again merge them togethor
Now activate your top layer
Now open your rose and paste it on to your canvas
Go to image /free rotate right by 90
Go to image / Resize by 75%
Place it to the right front bottom edge of the tag 2
Duplicat the Rose and go to image / Mirror
Give your roses a simple drop shadow
Now open the Purple Flowers
Paste them on to your canvas
Resize the flowers by 70%
Place them in center of the 2 Purple Roses
Now open your Tube
Copy and paste your tube and place
It in the center of the tag
Drag your tube down Below the 2 roses.
Open the Metal Flower 2
Copy and paste it as a new layer
Resize it by 60% and place it behind your tube
Open the Potion and place it on top the Roses
Resize the potion by 50%
Go to image / Adjust / Sharpen
And your Copyright Information and Name
And your Done !
Thanks for Trying my Tutorial
I Would love to see any Results
I Would love to see any Results
Friday, December 3, 2010
Bah HumBug !
Supplies Needed:
Kit of Choice As I am Using a Kit
By Candy's Treats "Bah HumBug"
You can purchase this kit at Stargazer Scrap Shop
Tubes of Choice
Im Using the Artwork of ©Keith Garvey
You Can purchase his work at MPT
You need a license to use his art work.
Plug ins - Xereo - Soft Mood
Mura Meister - Copies
Font of Choice
Any similarities to another tutorial is purely coincidental.
Lets Begin
File new 700x700
Grab your flood fill tool and flood fill the background White.
Open Frame 2,3 and 4
Copy and paste Frame 2 as a new layer
Go to image Resize by 85%
Make sure all layers is unchecked
After Resizing your frame Go to Image/Free Rotate/Right by 20
Go to Image / Adjust / Sharpen
Copy and paste Frame 3 as a new layer
Go to image Resize by 85%
Make sure all layers is unchecked
After Resizing your frame Go to Image/Free Rotate/left by 20
Go to Image / Adjust / Sharpen
Copy and paste Frame 4 as a new layer
Go to image Resize by 85%
Make sure all layers is unchecked
After Resizing your frame Go to Image/Free Rotate/Right by 20
Go to Image / Adjust / Sharpen
Activate your bottom frame
Grab your magic wand and click in the center of the frame
Make sure your feather / Tolerance is set at 0
Go to selections/ Modify / Expand by 5
Activate your background layer
Open Paper 6 and copy and paste it as a new Layer
Resize the paper by 85%
Go to selections / Invert / Hit your delete button once
Select None - Go to image/ Adjust / Sharpen
Now we are going to activate the top Layer once again
Open 3 Flowers and arrange them in any order as long as they are centered
Merge the 3 flowers together/merge down all 3 flowers
Go to effects/plugins/muras/copies and choose encircle
Change the Number to 8 and click ok
Now drag the ring of flowers to below your bottom frame
Give the ring of flowers a simple drop shadow I used
V&H 2 / Op 50 / Blur 5
Now Open the Mesh
Copy and past the mesh as a new layer
Resize your mesh by 85%
Move the mesh above your background layer
Go to image Free Rotate right by 20
Duplicate the mesh and go to image / mirror
Merge togther the ttwo mesh layers
Open Cluster 3 and paste it as a new layer
Bring it to above the top frame
Image / Resize / 85%
Go to Image / Free Rotate left by 20
Place it near the bottom edge of your frame
Open your Close up of Choice
Then Paste your close up as a new layer
Bring your close up on top your first frame
Place it to the left side
Lower the opacity of your close up to 33
Open your main Tube and paste it as a new layer
Go image / Mirror
Resize your tube if you need to as i did mine by 85%
Move your tube to the right side
Go to effects / Xero/ Soft Mood / Default settings ok
Duplicate your main tube
Drag your main tube under your bottom frame layer
Grab your eraser tool and erase any part that stick out
Repeat the eraser to your top top tube as well.
Open the HumBug Charms
Paste it as a new layer and make sure your arrange it to the top
resize the Charms by 85%
Go to image / Free rotate left by 20
Open one of the stockings
Resize your stocking by 60%
Move it to the far left of your HumBug Charms
And place it on the corner of the B on Bah
(see my image for preference)
Open your tag
Resize your tag by 60%
Free rotate your tag right by 25
Place it at the bottom left of your image(tag)
Add Your Name and Proper Copyright Information
Walah Your Done !!
Thanks for Trying my Tutorial
I Would love to see any Results
Grab your flood fill tool and flood fill the background White.
Open Frame 2,3 and 4
Copy and paste Frame 2 as a new layer
Go to image Resize by 85%
Make sure all layers is unchecked
After Resizing your frame Go to Image/Free Rotate/Right by 20
Go to Image / Adjust / Sharpen
Copy and paste Frame 3 as a new layer
Go to image Resize by 85%
Make sure all layers is unchecked
After Resizing your frame Go to Image/Free Rotate/left by 20
Go to Image / Adjust / Sharpen
Copy and paste Frame 4 as a new layer
Go to image Resize by 85%
Make sure all layers is unchecked
After Resizing your frame Go to Image/Free Rotate/Right by 20
Go to Image / Adjust / Sharpen
Activate your bottom frame
Grab your magic wand and click in the center of the frame
Make sure your feather / Tolerance is set at 0
Go to selections/ Modify / Expand by 5
Activate your background layer
Open Paper 6 and copy and paste it as a new Layer
Resize the paper by 85%
Go to selections / Invert / Hit your delete button once
Select None - Go to image/ Adjust / Sharpen
Now we are going to activate the top Layer once again
Open 3 Flowers and arrange them in any order as long as they are centered
Merge the 3 flowers together/merge down all 3 flowers
Go to effects/plugins/muras/copies and choose encircle
Change the Number to 8 and click ok
Now drag the ring of flowers to below your bottom frame
Give the ring of flowers a simple drop shadow I used
V&H 2 / Op 50 / Blur 5
Now Open the Mesh
Copy and past the mesh as a new layer
Resize your mesh by 85%
Move the mesh above your background layer
Go to image Free Rotate right by 20
Duplicate the mesh and go to image / mirror
Merge togther the ttwo mesh layers
Open Cluster 3 and paste it as a new layer
Bring it to above the top frame
Image / Resize / 85%
Go to Image / Free Rotate left by 20
Place it near the bottom edge of your frame
Open your Close up of Choice
Then Paste your close up as a new layer
Bring your close up on top your first frame
Place it to the left side
Lower the opacity of your close up to 33
Open your main Tube and paste it as a new layer
Go image / Mirror
Resize your tube if you need to as i did mine by 85%
Move your tube to the right side
Go to effects / Xero/ Soft Mood / Default settings ok
Duplicate your main tube
Drag your main tube under your bottom frame layer
Grab your eraser tool and erase any part that stick out
Repeat the eraser to your top top tube as well.
Open the HumBug Charms
Paste it as a new layer and make sure your arrange it to the top
resize the Charms by 85%
Go to image / Free rotate left by 20
Open one of the stockings
Resize your stocking by 60%
Move it to the far left of your HumBug Charms
And place it on the corner of the B on Bah
(see my image for preference)
Open your tag
Resize your tag by 60%
Free rotate your tag right by 25
Place it at the bottom left of your image(tag)
Add Your Name and Proper Copyright Information
Walah Your Done !!
Thanks for Trying my Tutorial
I Would love to see any Results
Subscribe to:
Posts
(Atom)
My Blinkie
