Foxy Designz
Wednesday, September 15, 2010
Paris Beauties
Paris Beauties
Supplies Needed:
Kit of Choice As I am Using a Kit
Created by Jill called "CestLaVie"
You can purchase this kit at her Store HERE
4 Tubes of Choice or 4 Close ups
Im Using the Artwork of Jennifer Janesko
You Can purchase her work at CILM
You need a license to use her art work.
Vix Mask 414 Which you can get from her site HERE
Font of ChoiceAny similarities to another tutorial is purely coincidental.
Let's Begin :)
Kit of Choice As I am Using a Kit
Created by Jill called "CestLaVie"
You can purchase this kit at her Store HERE
4 Tubes of Choice or 4 Close ups
Im Using the Artwork of Jennifer Janesko
You Can purchase her work at CILM
You need a license to use her art work.
Vix Mask 414 Which you can get from her site HERE
Font of ChoiceAny similarities to another tutorial is purely coincidental.
Let's Begin :)
Open a New 700x700
(Dont worry bout the size we will resize later)
Open your mask and a paper of choice
Minimize your mask
Copy and paste your paper as a new layer
Go to layers / New Mask Layer/ From Image
Find Vix_Mask414 / Source Luminance/ Invert mask unchecked
(Dont worry bout the size we will resize later)
Open your mask and a paper of choice
Minimize your mask
Copy and paste your paper as a new layer
Go to layers / New Mask Layer/ From Image
Find Vix_Mask414 / Source Luminance/ Invert mask unchecked
On your mask layer Merge group
Resize your mask by 85%
Now Go to Image/ Free Rotate by 45% left
Open your Frame and Paste it as a new layer
Resize it By 85%
Free rotate your frame by 20% to left
Open your ribbon and paste it as a new layer
Resize your ribbon to 50%
Go to Free Rotate by 20% to the right
Place the ribbon at top Middle of your Frame.
Resize your mask by 85%
Now Go to Image/ Free Rotate by 45% left
Open your Frame and Paste it as a new layer
Resize it By 85%
Free rotate your frame by 20% to left
Open your ribbon and paste it as a new layer
Resize your ribbon to 50%
Go to Free Rotate by 20% to the right
Place the ribbon at top Middle of your Frame.
Add a Simple small drop shadow to your frame.
Open Flowers and paste them as a new layer
Reisize your flowers down by 60%
Free rotate your flower right by 20%
Postion it at the top middle of the frame
Now Duplicate your flower
Go to Image/Mirror
Then Image / Flip and place it to the right.
Open the medal doodle
Copy and paste the doodle behind both flower layers
Leave this one as it but if you need to resize it(85%)
Duplicate your medal doodle
Duplicate it and go to Image/ Mirror/Flip
No Free Rotate your doodle 45 Right
Resize your doodle by 60%
Place it to the left lower side under the frame
Open Flowers and paste them as a new layer
Reisize your flowers down by 60%
Free rotate your flower right by 20%
Postion it at the top middle of the frame
Now Duplicate your flower
Go to Image/Mirror
Then Image / Flip and place it to the right.
Open the medal doodle
Copy and paste the doodle behind both flower layers
Leave this one as it but if you need to resize it(85%)
Duplicate your medal doodle
Duplicate it and go to Image/ Mirror/Flip
No Free Rotate your doodle 45 Right
Resize your doodle by 60%
Place it to the left lower side under the frame
(See my results for help)
Open your Sequins
Paste your Sequins as a new layer
Then Reszie them by 80%
Postion one at the top. on top the Mask layer
Go to image/ mirror and place it to your liking or like mine
Give the sequins a simple drop shadow
Open the heart clock
Copy and paste it as a new layer
Then Resize it by 70%
Place it behind your sequins.
Give your clock a simple drop shadow.
Open your Sequins
Paste your Sequins as a new layer
Then Reszie them by 80%
Postion one at the top. on top the Mask layer
Go to image/ mirror and place it to your liking or like mine
Give the sequins a simple drop shadow
Open the heart clock
Copy and paste it as a new layer
Then Resize it by 70%
Place it behind your sequins.
Give your clock a simple drop shadow.
open the black flower
Copy and paste it as a new layer
Resize the flower by 50%
Place your flower on top your lower frame
Duplicate it and resize the duplicate by 85%
Place it to the right side top of the frame
Now Click and activate your frame layer
Click your magic wand
Tolerance and Feather to o
Hold shift button and select inside all the open areas in your frame
Go to selections / Modify/Expand by 4
Now open your 4 tubes or close ups
Paste them as a new layer
Postion and resize them to your liking
Once you have them in place
Copy and paste it as a new layer
Resize the flower by 50%
Place your flower on top your lower frame
Duplicate it and resize the duplicate by 85%
Place it to the right side top of the frame
Now Click and activate your frame layer
Click your magic wand
Tolerance and Feather to o
Hold shift button and select inside all the open areas in your frame
Go to selections / Modify/Expand by 4
Now open your 4 tubes or close ups
Paste them as a new layer
Postion and resize them to your liking
Once you have them in place
Go to Selections/ Invert
on each tube layer click the delete button once
Do Not select none yet
Open your paper of choice im Using a black one
Hit the delete button Select none.
Add Your name with Font of shoice as Im Using JackieO ROB Font
Add Your Proper CopyRight Info on your tag
And You Are Done!
Thank you For Stopping By and Trying My Tutorial.
on each tube layer click the delete button once
Do Not select none yet
Open your paper of choice im Using a black one
Hit the delete button Select none.
Add Your name with Font of shoice as Im Using JackieO ROB Font
Add Your Proper CopyRight Info on your tag
And You Are Done!
Thank you For Stopping By and Trying My Tutorial.
♒☠ Foxys Designz ☠♒
Friday, September 10, 2010
Touched
Touched
Scrapkit By Created by Jill
A Touch of Color
PTU You can Purchase it Here
Tube of Choice as Im using
Dark Yarrow from Dreamscape Imaging
You must have a license to use her art
Font of Choice
I Used Jelyka
Plugins
I Used Jelyka
Plugins
EyeCandy 4 - Smoke
Xero - Porcilain
Animation Shop
I Assume you already have knowledge of PSP
Xero - Porcilain
Animation Shop
I Assume you already have knowledge of PSP
So Lets Begin!
Any similarities to another tutorial is purely coincidental.
Open a New 600x250
Open a paper of your choice
go to selection/select all and paste into selection
go to selections / modify / contract by 4
paste paper as new layer and hit the delete button once
select none
Grab your Square Rectangle Shape
Width 8 and choose a color matching your tube or kit
And put it in the foreground/ background Null
Convert it to raster and use a small inner Bevel On it.
Open a paper of your choice
go to selection/select all and paste into selection
go to selections / modify / contract by 4
paste paper as new layer and hit the delete button once
select none
Grab your Square Rectangle Shape
Width 8 and choose a color matching your tube or kit
And put it in the foreground/ background Null
Convert it to raster and use a small inner Bevel On it.
Use a image of choice
As i used the one From Dark Yarrows Tube
Grab your magic wand and select the center of your Square.
Go to selections/ modify/ expand by 4
Go to selections/invert
Select your image layer and hit the delete button once
Make sure your image is under the Sqaure
Go to effects/ porcilain/ default settings
set the image to Luminace(L)
As i used the one From Dark Yarrows Tube
Grab your magic wand and select the center of your Square.
Go to selections/ modify/ expand by 4
Go to selections/invert
Select your image layer and hit the delete button once
Make sure your image is under the Sqaure
Go to effects/ porcilain/ default settings
set the image to Luminace(L)
Open the string Mesh
Copy and past it as a new layer
Resize your mesh if you need to as
i did by 50%
Give the mesh a drop shadow
Open the window Panel
Copy and paste it as a new layer
Resize the panel by 50%
Grab your magic wand and select the middle window
Go to selections/ modify/ expand by 3
Open another paper of your choice
Paste it as a new layer
Resize your paper by 50%
Go to image/ Adjust and Sharpen it
Copy and past it as a new layer
Resize your mesh if you need to as
i did by 50%
Give the mesh a drop shadow
Open the window Panel
Copy and paste it as a new layer
Resize the panel by 50%
Grab your magic wand and select the middle window
Go to selections/ modify/ expand by 3
Open another paper of your choice
Paste it as a new layer
Resize your paper by 50%
Go to image/ Adjust and Sharpen it
Go to Selections/ Invert and hit delete once
then Select none.
open some leaves of your choice
I Choose the red ones from Jills Kit
Copy and past them as a new layer
I Didnt resize mine
(see my image for Results)
Go to effects / Xereo/ Porcelin
Use the Default settings 2 times
to give it the faded look
Make sure your leafs are under the window panel
then Select none.
open some leaves of your choice
I Choose the red ones from Jills Kit
Copy and past them as a new layer
I Didnt resize mine
(see my image for Results)
Go to effects / Xereo/ Porcelin
Use the Default settings 2 times
to give it the faded look
Make sure your leafs are under the window panel
Open the Gears and paste them as a nwe layer
Resize the Gears by 50%
Place the gears to the left side
Go to Image / Adjust / Sharpen your gears
Give the gears a drop shadow
Open a different Leaf
Copy and past the leaf as a new layer and place
it behind your image layer
Go to effects and use the same Porcilain settings as before
Give the leafs a drop shadow.
Place the leaf so it looks like its hanging out from the square.
Add the rest of your elements of choice now
And Your tube of choice as we will get ready to
Animate the Smoke.
Dont forget to add your right copyright info
Resize the Gears by 50%
Place the gears to the left side
Go to Image / Adjust / Sharpen your gears
Give the gears a drop shadow
Open a different Leaf
Copy and past the leaf as a new layer and place
it behind your image layer
Go to effects and use the same Porcilain settings as before
Give the leafs a drop shadow.
Place the leaf so it looks like its hanging out from the square.
Add the rest of your elements of choice now
And Your tube of choice as we will get ready to
Animate the Smoke.
Dont forget to add your right copyright info
STEP 1
Select your paper layer under the window panel
duplicate it 2 times for a total of 3 layers
x out the eye on the bottom 2
select the top layer
go to Eye Candy 4 / Smoke
Select your paper layer under the window panel
duplicate it 2 times for a total of 3 layers
x out the eye on the bottom 2
select the top layer
go to Eye Candy 4 / Smoke
Use the Settings Below
x out the top layer and open layer 2
STEP 2
Repeat step 1 but this time hit the random seed button once
x out the 2 layer and open layer 3
STEP 3
Repeat step 2 but this time hit the random seed button once
Now x out layer 3 and ope the first one
Now there may look like some smoke outside the panel but each
layer of smoke Grab your eraser tool for each one and
Erase if there is any hanging outside the Window Panel.
Repeat step 1 but this time hit the random seed button once
x out the 2 layer and open layer 3
STEP 3
Repeat step 2 but this time hit the random seed button once
Now x out layer 3 and ope the first one
Now there may look like some smoke outside the panel but each
layer of smoke Grab your eraser tool for each one and
Erase if there is any hanging outside the Window Panel.
TIME TO ANIMATE
With layer 1 of smoke open
Merge Visible / edit Copy
Go to Animation Shop
With layer 1 of smoke open
Merge Visible / edit Copy
Go to Animation Shop
Paste as a new animation
go back to Your PSP
Edit UnMerge
Close out the Top layer
Now open the eye one 2nd one
Merge Visible / edit Copy
Go to Animation Shop
Paste it after current frame.
Do the same things as Step 3 above
Now in animation shop
Go to Edit and Select All
Then go to Animation, Frame Properties and set it to 40
Play your animation and Your Done !
Thanks for Trying my Tutorial !
Foxy
go back to Your PSP
Edit UnMerge
Close out the Top layer
Now open the eye one 2nd one
Merge Visible / edit Copy
Go to Animation Shop
Paste it after current frame.
Do the same things as Step 3 above
Now in animation shop
Go to Edit and Select All
Then go to Animation, Frame Properties and set it to 40
Play your animation and Your Done !
Thanks for Trying my Tutorial !
Foxy
Thursday, September 2, 2010
Gothic Journey
I was Inspired by alot of people to start
Writing Tutorials again so we are going to give it a shot once again.
Gothic Journey
Scrapkit By Gothic Inspirations
A Gothic Journey
PTU You can Purchase it Here
Tube of Choice as Im using
Diana Martinez from MPT
You must have a license to use her art
Scrapkit By Gothic Inspirations
A Gothic Journey
PTU You can Purchase it Here
Tube of Choice as Im using
Diana Martinez from MPT
You must have a license to use her art
Font of Choice
Animation Shop
I Assume you already have knowledge of PSP
Animation Shop
I Assume you already have knowledge of PSP
So Lets Begin!
File / New / 800x800 and flood fill it with white
we can always Resize later on
Open Frame 1 copy and paste the frame as a new layer
Resize your frame by 40%
Now go to Image Adjust and Sharpen
Open the Smoke Element
Copy and paste the Smoke as a new layer
Drag the Smoke under your frame layer
Grab your eraser tool and earase and extra hanging outside the frame
Copy and paste your tube as a new layer
Duplicate your tube and drag the duplicate under the smoke
On your top tube grab the eraser and erase the extra hanging out below the frame
Active the bottom tube and add a small drop shadow
I Used H-V 1 Opacity 69 Blur 6 and reverse it and use -1 both settings again.
Now activate your top tube once more
Grab your eraser tool and erase parts of the tube so it looks like the smokes over her
we will animate the smoke later.
activate your frame layer
Grab your magic wand and click inside it setting tolerance 0
go to selections/Modify/expand by 4
Copy and paste your paper of choice as a new layer
Go to Selections/Invert/Delete/ Select None
Make sure your paper layer is under your botton tube layer
Open Up Tree Stump2 and copy and paste it as a new layer
Resize the tree stump by 40%
Place the tree to the left side on top the frame
Give your tree stump a slight drop shadow
Open the skulls and paste them as a new layer
Place the skulls on top the tree at the bottom
See my image for preferences
open the Skele-Hand and paste it as a new layer
Resize the hand by 30% place it to the right side the frame so
it looks like its hanging from the inside
go to image/adjust/ adjust image
grab the gothic journey book
copy and paste the book as a new layer
resize the book by 35%
Place the book under the hand so looks like its handling the book
Give your book a small drop shadow
go to image/adjust/ adjust image
Open up the spider and paste it as a new layer
Resize your spider and place it on top between the bok and skull pile
Open the gothic lights and paste it as a new layer
resize the light by 35% and place it to the top far right of the frame
use my image for preference
duplicate the lights and place the duplicate to the far left
go to image/adjust/ adjust image
Open the crow and paste it as a new layer
resize the crow by 30% and place it to the top left of the frame
so it looksl ike its sitting on the frame
Duplicate the crow and go to image/mirror
It should now be on the right side the frame
Adjust and move the crow slightly so it looks like its sitting on the light
Give your crows a drop shadow
Open the Sign1 and paste it as a new layer
Resize the sign by 50% or till it fits perfect above behind the tube layer
go to image and adjust
Copy and paste the smudge as a new layer
Resize the smudge by 35%
go to image/adjust/ adjust image
Move the smudges behind the frame and tube layer
and place it to the right
Duplicate the smudge and go to Image/Mirror
It should now be on the left side
Give the smudges a drop shadow
Add Your name and the Proper Copyright of your Tube Image
Your done and Now its Time to Animate
go to the smoke layer and duplicate it 2 times for a total of 3
Rename each layer 1,2, and 3
X out 2 and 3 and activate 1
Grab your mesh tool
Grab the center right knod and move it a tiny bit then do the same thing for the left one
convert it before going on to the next part
X out layer 1 and open #2
Do the same thing as above only with the mesh tool move them in oposite directions
(Sorta like a random Seed only doing it with mesh tool)
X out layer 2 and open #3
Do the same thing as above only with the mesh tool move them in oposite directions
one more time.
Now open your animation shop
We can always resize it in animation shop if you need to
x out 2 and 3 and open 1
x out your white background
Merge visible, go to edit copy
Go to animation shop and paste as a new animation
Do the same thing for the next 2 as well
after getting all 3 layers in animation shop
go to select all and go to frame properites and change it to 40
Play your animation and resize it your Done !!
we can always Resize later on
Open Frame 1 copy and paste the frame as a new layer
Resize your frame by 40%
Now go to Image Adjust and Sharpen
Open the Smoke Element
Copy and paste the Smoke as a new layer
Drag the Smoke under your frame layer
Grab your eraser tool and earase and extra hanging outside the frame
Copy and paste your tube as a new layer
Duplicate your tube and drag the duplicate under the smoke
On your top tube grab the eraser and erase the extra hanging out below the frame
Active the bottom tube and add a small drop shadow
I Used H-V 1 Opacity 69 Blur 6 and reverse it and use -1 both settings again.
Now activate your top tube once more
Grab your eraser tool and erase parts of the tube so it looks like the smokes over her
we will animate the smoke later.
activate your frame layer
Grab your magic wand and click inside it setting tolerance 0
go to selections/Modify/expand by 4
Copy and paste your paper of choice as a new layer
Go to Selections/Invert/Delete/ Select None
Make sure your paper layer is under your botton tube layer
Open Up Tree Stump2 and copy and paste it as a new layer
Resize the tree stump by 40%
Place the tree to the left side on top the frame
Give your tree stump a slight drop shadow
Open the skulls and paste them as a new layer
Place the skulls on top the tree at the bottom
See my image for preferences
open the Skele-Hand and paste it as a new layer
Resize the hand by 30% place it to the right side the frame so
it looks like its hanging from the inside
go to image/adjust/ adjust image
grab the gothic journey book
copy and paste the book as a new layer
resize the book by 35%
Place the book under the hand so looks like its handling the book
Give your book a small drop shadow
go to image/adjust/ adjust image
Open up the spider and paste it as a new layer
Resize your spider and place it on top between the bok and skull pile
Open the gothic lights and paste it as a new layer
resize the light by 35% and place it to the top far right of the frame
use my image for preference
duplicate the lights and place the duplicate to the far left
go to image/adjust/ adjust image
Open the crow and paste it as a new layer
resize the crow by 30% and place it to the top left of the frame
so it looksl ike its sitting on the frame
Duplicate the crow and go to image/mirror
It should now be on the right side the frame
Adjust and move the crow slightly so it looks like its sitting on the light
Give your crows a drop shadow
Open the Sign1 and paste it as a new layer
Resize the sign by 50% or till it fits perfect above behind the tube layer
go to image and adjust
Copy and paste the smudge as a new layer
Resize the smudge by 35%
go to image/adjust/ adjust image
Move the smudges behind the frame and tube layer
and place it to the right
Duplicate the smudge and go to Image/Mirror
It should now be on the left side
Give the smudges a drop shadow
Add Your name and the Proper Copyright of your Tube Image
Your done and Now its Time to Animate
go to the smoke layer and duplicate it 2 times for a total of 3
Rename each layer 1,2, and 3
X out 2 and 3 and activate 1
Grab your mesh tool
Grab the center right knod and move it a tiny bit then do the same thing for the left one
convert it before going on to the next part
X out layer 1 and open #2
Do the same thing as above only with the mesh tool move them in oposite directions
(Sorta like a random Seed only doing it with mesh tool)
X out layer 2 and open #3
Do the same thing as above only with the mesh tool move them in oposite directions
one more time.
Now open your animation shop
We can always resize it in animation shop if you need to
x out 2 and 3 and open 1
x out your white background
Merge visible, go to edit copy
Go to animation shop and paste as a new animation
Do the same thing for the next 2 as well
after getting all 3 layers in animation shop
go to select all and go to frame properites and change it to 40
Play your animation and resize it your Done !!
Subscribe to:
Posts
(Atom)
My Blinkie
